Mustek Power Must 600 LCD Manual De Instrucciones página 7

Specification
MODEL
INPUT
Capacity
Voltage
Voltage Range
OUTPUT
AC Voltage Regulation
(Batt. Mode)
Frequency Range
(Batt. Mode)
Transfer Time
Waveform (Batt.
Mode)
Protection
BATTERY
Battery Type &
Number
Typical Recharge Time
Protection
INDICATORS
LCD Display
ALARM
Battery Mode
Low Battery
Overload
Battery Replacement
Fault
PHYSICAL
Dimension,
DXWXH (mm)
Net Weight (kg)
ENVIRONMENT
Humidity
Noise Level
PowerMust PowerMust
600LCD 800 LCD
600VA/360W 800VA/480W 1000VA/600W 1500VA/900W 2000VA/1200W
Short circuit and Overload Protection
12 V/7 AH x 12 V/9 AH x
1 1
4-6 hours recover to 90% capacity
Discharge and Overcharge Protection
AC mode, Battery Mode, Load Level, Battery Level, Input Voltage,
Output Voltage, Overload, Fault, and Low Battery
287X100X142
4.25 4.9
0-90 % RH @ 0- 40°C (non-condensing)
PowerMust
1060 LCD
220/230/240 VAC
162-290 VAC
±10%
50Hz +/-1 Hz
Typical 2-6 ms, 10 ms max.
Simulated Sine Wave
12 V/7 AH x 2
Sounding every 10 seconds
Sounding every second
Sounding every 0.5 second
Sounding every 2 seconds
Continuously sounding
350X146X160
8.0
Less than 40dB
6
PowerMust PowerMust
1590 LCD 2012 LCD
12 V/9 AH x
12 V/9 AH x 2
2
397x146x205
11.1 11.5
EN