Teldat C Serie Manual Del Usuario página 36

Quick Config>list ip
--- IP Connections ---
Id Under Subitfc
---- ------- -------
IP1 LAN1 ----
IP2 WAN1 ----
IP3 ISDN1 B1
IP4 ADSL1 ATM1
IP5 ADSL1 ATM2
Quick Config>
Quick Config>list ip 1
IP Connection: IP1
Underlying Connection: LAN1
Local IP address: 192.168.101.10
Encapsulation: IP
NAPT: Enabled
NAPT Peer Address 192.168.101.15
Description: Conexion LAN
Quick Config>
Quick Config>list ip 3
IP Connection: IP3
Underlying Connection: ISDN1
Subinterface: B1
Local IP address: 192.168.103.10
Encapsulation: PPP
User: userTeldat
Password: ****
Remote Authentication Protocol: CHAP
Remote user: userChap
Call Number: 789456123
Release Time: 100
NAPT: Enabled
Description: Conexion RDSI
Quick Config>
Quick Config>list ip 5
IP Connection: IP5
Underlying Connection: ADSL1
Subinterface: ATM2
Local IP address: 192.168.105.10
Encapsulation: IP
NAPT: Enabled
Description: Conexión ADSL
Quick Config>
Cuando se elimina una conexión IP se eliminan también, en cascada, todos los
parámetros configurados que hayan requerido de dicha conexión, tales como las rutas,
backup, multilink, callback, etc.
Local-Address/Mask
------------------
192.168.101.10/24
192.168.102.10/24
192.168.103.10/24
192.168.104.10/24
192.168.105.10/24
– Menú rápido
TELDAT C
Configuración línea de comandos
33
II -
Traffic Auth NAPT
------- ----
IP ---
PPP PAP
PPP CHAP
PPPoE ---
IP ---
Mask: 255.255.255.0
Time out: 25 minutes
Mask: 255.255.255.0
Time out: 5 minutes
Mask: 255.255.255.0
Time out: 5 minutes
---------
YES - 25
NO
YES - 5
NO
YES - 5
Doc.DM211
Rev.6.0