Preparation Before Use; Care After Use - Hario Buono Manual De Instrucciones

Apply some dishwashing detergent on a washing
sponge and wash the product 2 to 3 times and rinse
off thoroughly before using the product for the rst time.
Then put some water in the product and let the water
boil. Repeat this procedure once or twice.
Do not use chlorine bleach.
Remove all stickers, if any attached to the body of
the product before use.
Wash the product thoroughly using a sponge or a
scrubbing brush. Wipe off any water and let the product
dry thoroughly.
Allowing traces of salt or oil to remain on the surface of
the product may result in corrosion.Please ensure to
keep the product clean.
Please be aware that allowing the product to remain in
contact with other products made of steel or aluminum
may cause corrosion to develop.
If any sign of corrosion is discovered, apply some
scouring compound cream on a sponge or a scrubbing
brush and rub it off, then rinse thoroughly.
White spots may appear on the bottom as you keep
using the product. This is caused by residue of magne-
sium and calcium contained in tap water. This is not
harmful to your health. The same will adhere to the
body, lid or pouring spout. Please wash off thoroughly
after use.

Preparation before use

Care after use