Kobalt KFG 1024B-03 Manual Del Usuario página 10

ASSEMBLY INSTRUCTIONS
2. Filling the Tank
Liquids to be sprayed must be as thin as water.
Thicker liquids will not spray properly. Do not
overfill the tank.
a. Remove the battery pack.
b. Unscrew the tank cap (D) and remove it from
the tank.
c. Fill the tank with the desired amount of water.
d. Measure the recommended amount of liquid
chemical. Carefully pour the liquid chemical
into the tank If necessary, use a funnel (not
included).
e. Screw the cap back onto the tank making sure
it is tightened securely.
Spray solutions may be premixed and poured into the tank, using a funnel if needed.
NOTICE: If using a funnel to fill the tank, be sure to thoroughly clean and rinse the funnel after
use. If premixing the spray solution, rinse the container used for mixing.
NOTICE: It is important to thoroughly clean the unit after each use. Allowing liquid to remain in
an idle tool for an extended period may cause its moving pieces and connectors to seize up.
2
Funnel
(not included)
10
D