Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
DMX
Connection
Master/Slave
Connection
Mounting
Product
Mounting
Diagram
Control Panel
Description
Password
ID Addressing
TOUR Note
The COLORado™ 1-Tri IP uses a regular DMX data connection for its
DMX personalities: TOUR, ARC.1, AR1.D, AR1.S, and HSV. See the
User Manual to connect and configure for DMX operation.
The COLORado™ 1-Tri IP uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Master/Slave operation.
Overhead Mounting
Button
Function
Exits from the current menu or function
<MENU>
Enables the currently displayed menu or sets the currently
<ENTER>
selected value into the selected function
Navigates upwards through the menu list and increases the
<UP>
numeric value when in a function
Navigates downwards through the menu list and decreases
<DOWN>
the numeric value when in a function
After being prompted, enter the following password by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This password cannot be changed and must be used whenever prompted.
In this mode, the products with the same DMX starting address will
respond to the DMX controller based on the product's individual ID
address setting. For example, if ID address "0," is selected, all the products
with the same DMX address will respond in unison.
Deactivate ID addressing in each product when using TOUR personality.
COLORado™ 1-Tri IP QRG
Secure the safety cable using
the passageway on the back
of the product.
3
Floor Mounting
Tabla de contenido
