Waking Up Your Phone - ZTE Blade V30 Vita Guia De Inicio Rapido

WARNING!
Do not remove the back cover. The battery
is not removable. Removal may cause fire
or explosion.
1. Connect the adapter to the charging jack.
2. Connect the charger to a standard AC
power outlet.
3. Disconnect the charger when the battery is
fully charged.
NOTE:
If the battery is extremely low, you may be
unable to power on the phone even when it
is being charged. In this case, try again after
charging the phone for at least 20 minutes.
Contact the customer service if you still cannot
power on the phone after prolonged charging.
7
Powering On/Off Your Phone
Make sure the battery is charged before
powering on.
• Press and hold the Power key to turn on
your phone.
• To power off, press and hold the Power
key to open the options menu, and touch
> .
NOTE:
If the screen freezes or takes too long to
respond, try pressing and holding the Power
key for over 10 seconds to restart the phone.

Waking Up Your Phone

Your phone automatically goes into sleep mode
when it is not in use for some time. The display
is turned off to save power and the keys are
locked to prevent accidental operations.
You can wake up your phone by turning on the
display and unlocking the keys.
Press the Power key to turn the screen on.
1.
2. Swipe up on the screen.
NOTE:
If you have set a fingerprint, a face recognition,
an unlock pattern, a PIN or a complex
password for your phone, you'll need to use
your fingerprint or face, draw the pattern, or
enter the PIN/password to unlock your screen.
8