Idiomas disponibles
Idiomas disponibles
INSTALLATION INSTRUCTIONS - TOP MOUNT
1.
Cut-out Area
Masking Tape
Sink installation recommended for professional installers only.
Drop-in side:
1. Select the drop-in kitchen sink template that applies to the model sink you are installing. Cut out the inside of the
template and discard the cut-out portion. Locate the template front to rear and right to left on the countertop so the bowl
will not interfere with the cabinets below. Attach the template to the countertop with masking tape and draw a pencil line
around the inside of the template. Discard the template.
Or
Invert sink and position onto the countertop. Locate sink front to rear and right to left so the bowl will not interfere with
the cabinets below. Trace a pencil line around the outside edge of the sink and remove the sink from the countertop.
Measure in 3/8" from the initial sink outline and draw a second line inside the first. Draw a 1-1/2" radius at each corner.
The second line will be your cut line.
2. Drill starer hole inside the cutout line.
3. Using a saber saw, cut inside of cut-out line. Trial fit sink to check proper fit.
4. Identify faucet hole locations. Drill a starter hole from reverse (under)side. Working from the top side as illustrated,
position a hole saw on the starter hole and drill to complete the faucet hole. To cool the hole saw and sink surface, a light
application of water, periodically, is necessary. Repeat steps for number of faucet holes required for faucet. Attach faucet,
drain, and accessories according to manufacturer's instructions.
5. Apply a bead of caulk (not included) to the underside of the sink flange. Secure the sink by pivoting the sink clips into
position illustrated and tighten screws in the front, then tighten rear and side screws.
TRANSOLID
LIMITED LIFETIME WARRANTY
®
All TRANSOLID silQgranite
®
LIMITED SINK WARRANTY
Transolid
will replace without charge, (excluding labor & transportation costs) any silQgranite
®
proven to be defective, with an equivalent replacement, within the specific appropriate period from date of purchase, to the original
owner, provided it has been used solely in a residential application and installed in accordance with the Transolid
tions, used and cleaned as recommended, and not damaged due to abuse, misuse, or negligence. For installed warranty concerns,
please contact Transolid
directly for further information and proper documentation. In the event of a warranty claim, the owner will
®
be required to provide proof of purchase in the form of sales receipt.
This warranty will not cover any damages which might be caused by the product. (Some states do not allow such limitation, so this
reference may not apply to you.)
Transolid
reserves the right to inspect any sink reported to be defective prior to replacement of the sink. All decisions are final. Re-
®
placement cost EXCLUDES transportation and any labor costs for the removal or reinstallation.
Transolid
shall not liable in case of:
®
• Damages resulting from abuse, such as heavy impact or dropped objects
• Improper applications (such as exposure to corrosive chemicals, photographic solutions, etc.)
• Any modifications made to the product after it left Transolid
SINK ACCESSORIES
Transolid
carries a 1 YEAR LIMITED WARRANTY ON ALL SINK ACCESSORIES to be free of all manufacturing defects under
®
normal use.
These warranties supersedes all other warranties, expressed or implied.
The foregoing warranties are exclusive and made only to the buyer. No other warranty, whether express, implied, or statutory, includ-
ing any warranty or merchantability or fitness for a particular purpose shall be deemed to exist in connection with any of the goods or
services supplied hereunder, and any implied warranties for a period greater than the warranty period contained in Transolid's limited
warranty are hereby excluded. Transolid
related to the goods or services supplied hereunder. No employee, agent, or other person is authorized to give any warranties on
behalf of Transolid in addition to or different from the herein given to assume for Transolid any other liability in connection with any of
its products except if in writing is signed by an officer of Transolid and expressly and intentionally gives such warranties or assumes
such liability.
2.
Drill starter hole
inside of cut-out
line
sinks feature a LIMITED LIFETIME WARRANTY to be free of all manufacturing defects under normal use.
shall not be liable for any indirect, incidental, special or consequential damages in any way
®
4.
3.
Cut inside
of line.
NOTE: Drill starter hole inside
of cut-out line
premises
®
silQgranite
SINKS
®
5.
sink supplied by Transolid
®
installation instruc-
®
• Improper installation/modification
• Improper care or maintenance
• Commercial application
• Scratches - Due to use
that is
®
