CHI 13120 Manual De Uso Y Cuidado página 11

Troubleshooting
Iron won't heat.
• Plug Iron into a working outlet.
• Select a temperature.
• Move or tilt the Iron to reset.
Water is leaking.
• Too much water is in the Reservoir.
• Steam Burst Buttons ( ) have been pressed while the Iron
was cold. Select a temperature and let Iron preheat for 2
minutes.
• If dry ironing, make sure the Adjustable Steam Lever is in the
Off (Dry Iron) position.
Iron won't steam.
• Ensure there is water in the Reservoir.
• Move the Adjustable Steam Lever to the
position.
• Preheat for 2 minutes.
Twisted cord.
• If the iron cord should become twisted, unplug Iron and let
cool. Hold Iron cord in the middle of entire length. Let plug
and Iron dangle freely until cord uncoils. This will extend the
life of the iron cord.
(Steam Iron)
11