Kobalt KBTS 124B-03 Manual De Instrucciones página 8

OPERATING INSTRUCTIONS
3. Turn the speaker ON/OFF
a. To turn on the Bluetooth speaker, press and
hold the ON/OFF button (A) for approximately
3 seconds; the indicator (E) will illuminate a
blue light and begin to flash to indicate that the
Bluetooth speaker is active.
b. To turn off the Bluetooth speaker, press and
hold the ON/OFF for button approximately
3 seconds; the blue indicator light will be
off to indicate that the Bluetooth speaker is
deactivated.
c. When the Bluetooth speaker is not in use for
about 10 minutes, the Bluetooth speaker will
automatically turn off and the blue indicator
light will be off.
4. USB Power Port
When a battery pack is installed or the speaker is
connected to an AC power supply and the speaker
is turned on, the USB power port (F) on the
Bluetooth speaker supplies a charging site for your
cell phone or other small USB device (5 Volt DC,
up to 2.1 Amp).
NOTE: Any device that uses more than 2.1 A
of DC electrical current will trip a self-resetting
overload switch and disable the output. To
reactivate the Bluetooth speaker, remove the
device and turn on the Bluetooth speaker.
5. Volume
Use the Volume + button (B) and Volume - button (C) to increase or decrease the volume of
the speaker, respectively.
NOTE: To control the volume by using the paired device's controls, first turn the speaker
volume to max (a beep will sound).
3
A
4
8
E
F