Gallagher S6 Instrucciones página 5

Gallagher 3E5315 S6 Lithium Solar Fence Energizer User Manual
• Electric animal fences intended for deterring birds, household pet containment or training
animals such as cows need only be supplied from low output energizers to obtain satisfactory
and safe performance.
• In electric animal fences intended for deterring birds from roosting on buildings, no electric
fence wire shall be connected to an earth stake. A warning sign shall be fitted to every point
where persons may gain ready access to the conductors.
• Where an electric animal fence crosses a public pathway, a non-electrified gate shall be
incorporated in the electric animal fence at that point or a crossing by means of stiles shall be
provided. At any such crossing, the adjacent electrified wires shall carry warning signs.
• Any part of an electric animal fence that is installed along a public road or pathway shall be
identified by electric fence warning signs (G6020) at regular intervals that are securely fastened
to the fence posts or firmly clamped to the fence wires.
• The size of the warning sign shall be at least 100mm x 200mm.
• The background colour of both sides of the warning sign shall be yellow.
The inscription on the sign shall be black and shall be either:
- the substance of "CAUTION: Electric Fence" or,
- the symbol shown:
• The inscription shall be indelible, inscribed on both sides of the warning
sign and have a height of at least 25mm.
• Ensure that no mains operated ancillary equipment is connected to the
electric animal fence.
• Protection from the weather shall be provided for the ancillary equipment unless this
equipment is certified by the manufacturer as being suitable for use outdoors, and is of a type
with a minimum degree of protection IPX4.
This energizer complies with international safety regulations and is manufactured to international
standards.
Gallagher reserves the right to make changes without notice to any product specification to
improve reliability, function or design. E & OE.
The author thanks the International Electrotechnical Commission (IEC) for permission to
reproduce Information from its International Publication 60335-2-76 Annex BB.1. All such
extracts are copyright of IEC, Geneva, Switzerland. All rights reserved. Further information on
the IEC is available from www.iec.ch. IEC has no responsibility for the placement and context in
which the extracts and contents are reproduced by the author, nor is IEC in any way responsible
for the other content or accuracy therein.
Save these instructions.
5