Installing The Built-In Electrode Arm; Installing Power Adapter - OHAUS STARTER2200 Manual De Instrucciones

STARTER 2200 Bench pH Meter
2.2

Installing the built-in electrode arm

Install the built-in electrode arm on the left or right sight of the STARTER 2200 meter.

Remove the rubber hole cover from the meter，insert the metal stick into the hole and screw
to fasten it.

Install the upper electrode arm upon the metal stick from above; adjust it to a desired height.
2.3

Installing power adapter


Choose the proper adapter clip, insert into the power adapter slot.

Use of other power adapters can damage the meter and void the warranty.

A surge protector or uninterrupted power supply (UPS) is also recommended.
EN-7