Idiomas disponibles
Idiomas disponibles
USER MANUAL
IMPORTANT SAFETY PRECAUTIONS: Before use please note the following safety precautions.
Failure to comply may be dangerous and cause damage to your mobile electronic devices.
-
The power bank unit contains an internal 4000mAh lithium polymer battery. Upon
initial use or after a prolonged period of storage, fully charge the unit before use. The
unit will reach its maximum performance after 2 or 3 full charging and discharging
cycles.
-
Using an incorrect power adaptor or USB cable could cause damage to both your
mobile devices and the Power Bank.
-
Do not submerge in water or expose to adverse weather conditions.
-
Avoid dropping the device.
-
Keep the device away from fire and high temperatures.
-
Keep the device out of reach of children.
-
During charging, the Power Bank case may become slightly warm. This is normal as
the charging and discharging process generates heat.
SPECIFICATIONS:
Capacity: 4000mAh – Lithium Polymer Battery.
Input: DC5V / 800mA.
Output: DC5V / 1000mA.
Battery Life: More than 500 charging cycles.
With charge indicator.
Micro USB cable included.
INSTRUCTIONS:
Indicator light: During the charging process of the power bank a red light will appear on the
device, at the same time, the blue lights of the charge indicator will start to flash. As the
charging process is completing the lights will start to remain solid. When a mobile device is
connected to the power bank a flashing red light will appear, this indicates that the mobile
device is being charged. During the charge transmission, the power of the portable charging
device will decrease and the lights on the charge indicator will start to disappear indicating the
remaining charge capacity available. Every light represents 25% of the total charge.
-
Charging the portable power device: Connect the micro USB connector cable to the
(IN) port on the portable charger. Select and change the power source if necessary
and connect to the Power Bank.
-
Charging mobile devices: Connect the USB cable to the mobile device using the
appropriate connector. Connect the other end of the USB cable to the (OUT) port of
the portable charger.
-
Remove the USB cable at the end of each process.
Imported by: MKTO CATAL IMPORTACIONES S.L.
Ctra. De Huercal Overa, s/n, 04640, Pulpí, Almería, Spain.
