ESYLUX PROTECTOR K 10 PLUS Manual Del Usuario página 8

GB INSTALLATION AND OPERATING INSTRUCTIONS
Congratulations on your purchase of this high-quality ESYLUX product. To
ensure proper operation, please read these user instructions carefully and
keep them for future reference.
1 • SAFETY INSTRUCTIONS
GB
CAUTION: work on the 230 V power system must be carried out
by authorised personnel only with due regard to the applicable
installation regulations. Switch off the power supply before
installing the system.
Use this product only as intended (as described in the user
instructions). Changes or modifications to the product or painting
it will result in loss of warranty. You should check the device for
damage immediately after unpacking it. If there is any damage,
you should not install the device under any circumstances.
If you suspect that safe operation of the device cannot be
guaranteed, you should turn the device off immediately and make
sure that it cannot be operated unintentionally.
2 • DESCRIPTION
The PROTECTOR K 10 plus is a photoelectric smoke detector
designed for use in residential buildings and triggers the alarm as
soon as smoke is detected. It meets the statutory requirements for
smoke detectors.
Most fires occur at night. We have no sense of smell while
sleeping and so cannot detect smoke. Therefore, smoke detectors
are an effective way of providing an early warning of the
danger. An alarm is triggered as soon as smoke enters the
device. The device does not detect flames.
8
Applications:
• Stand-alone mode
To keep maintenance and operating costs down, the PROTECTOR
K 10 plus is has a in-built lithium battery that lasts up to 10 years.
There is no need to change the battery. When the battery is
run down, just replace the PROTECTOR K 10 plus . Automatic
sensitivity adjustment ensures optimal safety regardless of
operating time. The reliability of the device remains the same,
even after a number of years. Briefly press the button (fig. 5.2) to
deactivate the alarm for about 10 minutes.
For optimum protection of your home, install smoke detectors
in all rooms, corridors, basements and store rooms. For basic
protection, install smoke detectors in all bedrooms, playrooms
and in the corridors on all floors (Fig. 1 and 2).
3 • INSTALLATION / ASSEMBLY / CONNECTION
• Refer to the current national guidelines on installation and
standards for smoke alarms (e.g. in Germany: DIN 14676).
ATTENTION:
• Install the detector in the centre of the ceiling.
• Do not install smoke detectors in bathrooms (high ambient
humidity), garages (exhaust fumes), draughty environments
(including air vents) or lofts with sharp angles (Fig. 2).
• The detector can be installed in loft ceilings, provided that the
slope of the pitched roof area does not exceed 20°.
• The device should be installed at least 50 cm away from walls,
ceiling joints (beams), furniture and lights.