Tripp-Lite DWM1742MA El Manual Del Propietario página 4

1. Separate VESA Plate from Wall Mount
loosen
remove
2a. Mount on Wood Stud Wall
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
14-03-249-93332F.indb 4
D6 Washer
Anchor Bolt
WARNING
4
Find a wood stud
location for mounting
the wall mount
Position the Mounting
Template to location
with the ↑ UP pointing
towards the ceiling
Mark the exact location
of the mounting holes
1
2
3
Drill pilot holes
Screw the wall
mount onto
the wall
4/14/2014 10:48:29 AM