Appendix I - Strong Racks SRSWS36R Manual Del Usuario

How to locate the center
The best and most accurate method for finding
the exact center of a stud is probing. To probe,
take a small drill bit, or a thin punch and
puncture the drywall. This method will allow
you to feel the stud. While puncturing the
drywall you will tap to ensure you are hitting a
stud. You will probe right or left about 1/8" at a
time until you push through locating the edge.
You can either find the edge and measure to the
center or you can probe to find both edges to
find the center. Stud finders will help, but can
give false readings. By probing you will be able
to tap and ensure what you are hitting is wood
rather than wiring, piping or other possible
of a stud:
hazards.

Appendix I

18