ECS Electronics CR-002-BB Manual De Instrucciones página 6

© ECS 2000 CR-002-BB-E
6. Lead the wiring harness inside, to the opening at the left rearside of the vehicle, where the 14-pole connector is located.
Connect the white cable with the supplied xating material (M6x10 + M6) to earth.
Use the excisting hole.
7. Connect the relay to the wiring harness (see gure 2).
Clip the relay to the upper metal edge from the excisting hole, where the 14-pole connector is situated.
8. Remove the 14-pole connector.
Cut the wire at position 9 of the 14-pole connector.
Connect the last red wire of the wiring harness to this wire of the vehicle (see gure 1).
Cut the wire at position 5 of the 14-pole connector.
Connect the black and brown wire of the wiring harness to this wire of the vehicle.
9. Reconnect the battery and check all electric functions with the trailer connected.
Reinstall disassembled parts.
161210DCI Bestel Nr.: CR-002-BB
X
fig. 2
REVISIE 1