Basic Operations; Bluetooth Operations - Caliber RMD 801DAB-BT Guia De Inicio Rapido

QUICKSTARTGUIDE
Unit buttons and connections:
AUX
USB

Basic operations

Home screen
Push the [HOME] button (6) to show the main menu. On the home
screen you can choose the available modes (RADIO / USB / SD /
Bluetooth / AUX) or enter the SWC / EQ or SETTING menu.
Sound Control
• Volume
Turn the [VOL] button (5) to adjust the volume level.
• Audio settings
By pushing the [SEL] button (5) you will enter the audio menu and you
can adjust BASS / TREBLE / BALANCE / FADER Etc.
Push to choose and rotate to adjust.
Note: when an EQ preset is chosen the bass and treble control are
not available.
• Other Audio Settings
Settings like preset equalizer, loudness or subwoofer ON/OFF can be
set by tapping the "EQ" icon on the main menu.
Day/night display mode
Tap the onscreen Sun button in the top bar to increase brightness.
Tap again to reduce brightness during night time.
Tap again to black out the screen.
Setup
Enter the setup menu by tapping the [SETTING] icon on the main menu.
Tap the items you would like to set. You can adjust audio, date and time,
language, calibration, etc.
Radio operations
Band
Tap the onscreen [BAND] button to choose FM1, FM2, FM3, AM1 or
AM2. On each band up to 6 presets can be stored.
Radio Seek Function
In Radio Mode, touch and hold the 7 or 8 button to adjust seek the
frequency automatically. Tap the button to adjust the radio frequency
manually step-by-step.
Save preset stations
There are six numbered preset buttons on the screen (P1-P6), which
can store and recall stations for each band. Tune in to the station you
want to store, touch and hold any key from P1-P6 until you hear a beep.
The station will be saved in the designated number.
After saving the stations, you can listen to short intros of each preset by
touching the [SCAN] button.
1. Display: 6.5" TFT-LCD touch screen
2. IR sensor: Remote control IR sensor
3. SD: Micro SD card reader
4. Power: Press to turn the unit ON.
When ON, press once to turn the display OFF
(During TFT off, the video out signal will be available so that the
connected monitor will show the screen of the unit.)
Press the button again to turn the display back ON
Press and hold the button again to turn the unit OFF
5. VOL/SEL: - Rotate for volume adjustment or adjust settings
- Push to enter the audio menu
6. HOME: Go to "HOME"-screen (main menu)
7. AUX: 3.5mm Jack-in - behind the cover cap
8. USB: Standard USB port
RDS
AF, TA, PTY are the RDS functions. Tap the onscreen buttons to turn
these functions ON/OFF.
Note: RDS might not be available in every country.
DAB operations
• Tap the SEARCH button to search all the available DAB stations.
• Tap the LIST button (on the bottom left corner) to see the list of all the
• Tap the 7 or 8 button to select the previous or next available DAB
• If you would like to save a desired DAB station, press and hold the
• Tap the BACK or HOME button in the top right corner to return
• Antenna installation instructions are in the back of this manual

Bluetooth operations

Pairing
Activate Bluetooth on your mobile phone, and search for available de-
vices. Select "RMD801DAB-BT Caliber", password "0000".
If successful connected the Bluetooth logo stays ON, if not this logo
keeps flashing.
Dial pad
Touch the dial pad to dial the number you would like to call. Touch the
[CALL] (green) button to send the number.
Call list
Displays your phonebook and call history, if you've given permission.
A2DP
Press the [MUSIC] button to enter the A2DP page to control playing
music of your cell phone using the onscreen controls (available if you
device supports A2DP).
Incoming calls
• Answer call:
• End call:
• Reject call:
USB/SD operations
Plug the USB/SD card into the USB/SD port. The unit will start playing
the contents automatically.
Audio playback
To control the audio playback, use the onscreen buttons.
- behind the cover cap
(max. 32GB)
- behind the cover cap
(max. 32GB)
available DAB stations.
station.
empty slot on the station list on the left. The station name will
be shown indicating that the desired station is saved. You can save up
to 10 stations. Tap the name of the station any time to reach
the desired station.
to the main user interface.
push the green horn at an incoming call
push the red horn
push the red horn at an incoming call