THOMSON THCVT2300DT Manual De Instrucciones página 23

Convector móvil turbo digital con mando a distancia
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TECHNICAL SPECIFICATIONS :
Model N° :
THCVT2300DT
Description :
Mobile turbo digital convector
Voltage :
220-240V~50-60Hz
CLASS 1
This product conforms to the requirements set by directives 2014/35/EC (repealing directive
73/23/EEC amended by directive 93/68/EEC) and 2014/30/EC (repealing directive 89/336/EEC)
OPERATING:
PRECAUTIONS FOR USE
1. Before using this appliance, ensure that it is placed on a flat, stable surface.
2. Never cover or put any product on the convector when it is heating.
3. Place the heater at least 90cm from the wall, furniture or curtains.
4. Check that the voltage corresponds to that of the power supply (230v mains
socket)
5. Let the heater to cool and unplug it before moving it, and use the handle to
move it.
USING THE HEATER
1. The power switch (on the side of the convector) must be on the OFF position,
before connecting the convector to the socket.
2. Press the power switch, a beep sound. The heater is in standby mode displaying
the room temperature (TEMP).
Turn on the radiator by pressing the button On/ Standby, the display also shows
the target temperature (SET).
Press the mode button to select one of the 3 heating powers: 1000 /1300 /2300W,
then press again to select the frost protection mode.
3. Press the "Turbo" button to activate ventilation.
(Note: In frost protection mode, the turbo function is disabled)
4. The desired room temperature can be adjusted using the thermostat. Set the
target temperature (SET) using the + or - buttons.
5. When the room temperature reaches the target temperature, the radiator stops
heating. When the room temperature have decreased by 2°C compared to the
target temperature. The convector starts heating again.
6. Button selection °F / °C allows to change the display to Celsius or Fahrenheit.
7. Button allows you to choose a delay switch off between 1 to 24 hours.
8. The heater has a protection system against overheating.
1. Button On / Standby
2. Button turbo function
3. Button temperature increase
4. Button timer
5. Button mode : selection of heating power
and frost protection mode
6. Button selection °F / °C
7. Button temperature decrease
Low power
Mid power
High power
1000 W
1300 W
2300 W
GB-9
Tabla de contenido
loading

Tabla de contenido