General Description - GYS GYSPACK 750 Manual Del Usuario

Thank you for choosing GYSPACK 750 – this is a high quality product and in order to get the
maximum from it, we advise you to carefully read this instruction manual. Please also retain the
manual for future reference.

GENERAL DESCRIPTION

The high performance internal battery allows the GYSPACK 750 to serve 3 functions:
Instant Start (750 A) from vehicle equipped with 12V Lead battery (Gel or Liquid electrolyte).
12 V DC power supply, to supply light Spot, TV, tools, etc...
In-built torch
To ensure good working conditions and optimize the durability of its
internal battery, it is important to recharge it after each use, and leave
!
it plugged in until next usage.
STARTING FUNCTION
Test of internal battery before the start (disconnect the charging cable)
In order to test the internal battery, press the test button
The battery voltage is displayed on the digital display after a short time, if the displayed value is
greater than 12.5 V you can use GYSPACK 750. The ideal voltage should be approximately 12.9 V
Starting a vehicle
In order to use the GYSPACK 750 as a starter, follow these steps:
Disconnect the GYSPACK from the mains.
Set the GYSPACK 750 to OFF. Turn the vehicle ignition key to OFF.
Connect the red clamp to the + terminal of the battery, and the black one
to the – terminal. A buzzer will indicate any polarity inversion.
Switch the commutator on ON
Go to the driver's seat and turn the ignition key. If your engine does not
start, wait 3 minutes until next attempt. ( 6 sec max)
Nb : A vehicle which does not start could have a problem not related to a
defective battery: alternator, spark plug...
Unplug the black clamp, then the red one from the vehicle.
Recharge your GYSPACK 750 after use. (see 'Charging internal battery')
:
5