Courtyard Creations RTS016G Instrucciones Para El Montaje página 2

FIGURE 2
15
Step 2:
Fasten the back assembly (#5) to the seat assembly
(#4) by using bolts (#8). Keep the bolts loose.
See Figure 2.
FIGURE 4
2
9
#9 BOLT M6*35
Step 4:
Turn the glider to its upright position. Fasten the back
assembly (#5) to the arms (#1 and #2) by using bolts
(#9). See Figure 4.
V-3
5
8
#8 BOLT M6*15
5
1
35
DO NOT RETURN TO THE STORE!
STOP
FIGURE 3
4
8
Step 3:
At the front of the glider, fasten the seat assembly (#4)
to the arms (#1 and #2) by using bolts (#8). Keep the
bolts loose. See Figure 3.
FIGURE 5
1
Higher tube
Step 5:
Fasten the swing bars of the arms (#1 and #2) to the
bottom frame (#6) by using bolts (#10 and #11),
washers (#12) and plastic nuts (#13). Make sure that
the higher tube on the bottom frame (#6) is facing the
front of the glider.
been tightened completely.
PAGE 2 OF 3
4
8
15
#8 BOLT M6*15
13
2
6
13
12
50
#10 BOLT M6*50
55
#11 BOLT M6*55
Make sure that all of the bolts have
See Figure 5.
2
1
12
12
12
12
10
12
12 12
11