Remote Control (Optional) - Falcon RMG4HD90SG Manual De Instrucciones

REMOTE CONTROL (OPTIONAL)

The appliance can be controlled using a remote control
powered by a 1.5 V carbon-zinc alkaline batteries of the
standard LR03-AAA type.
• Do not place the remote control near to heat sources.
• Used batteries must be disposed of in the proper
manner.
T1 Lighting Upper panel closed: opens the upper panel and sets the lights at the maximum inten-
sity.
Upper panel open: switches the lights on/off.
T2 Courtesy light Sets the lights at an intermediate intensity or switches the lights off (only
when the upper panel is open).
Motor Upper panel closed: opens the upper panel, switches on the motor at the
T3
latest selected speed.
Upper panel open: switches the motor on/off.
When pressed for about
upper panel closed: opens the upper panel and switches on the motor at the
third speed and the lights at the maximum intensity.
Upper panel open: switches off lights and motor and closes the upper
panel.
T4 Decreases the speed at every short pressure.
When pressed for about 2 Seconds:
decreases the intensity of lights.
T5 Increases the speed at every short pressure.
When pressed for about 2 Seconds:
Increases the intensity of lights.
T6 Activates/deactivates the intensive speed.
T7 Delay / 24h Activates / deactivates the Delay-function.
When pressed for 2 seconds :
Activates/deactivates the 24H-function.
EN
Remote control (control panel)
2 Seconds
T1
T2
T3
T4
T5
T6
T7
:
2
27
7