Av14 Vehicle Cradle Instructions - Intermec AV14 Instrucciones De Instalación

AV14 Vehicle Cradle Instructions

Use these instructions to install the vehicle cradle (Model AV14)
on model PB21, PB22, PB31, and PB32 printers. The vehicle
cradle provides a convenient way to mount the printer on your
vehicle for charging or printing.
Items Provided in the Kit
•
•
•
•
•
•
•
•
Note: The vehicle cradle comes configured for use with the
model PB31 and PB32 printers. If you are using a model PB21 or
PB22 printer, you will need to remove the PB31/PB32 base and
install the PB21/PB22 base. You also need to adjust the latch
hooks at the top of the vehicle cradle.
To change the base and adjust the latch hooks
1 Using a small Phillips screwdriver remove the four screws
Mounting hardware
RAM vehicle mount base
Mounting arm
RAM vehicle base
Mounting arm
Vehicle cradle
Installation instructions
PB21/PB22 vehicle cradle base
attaching the PB31/PB32 base to the vehicle cradle.
Screw (4 places)
1