MODELO 4TM64A/9515A
MANTENIMIENTO
ADVERTENCIA: DESCONECTE SIEMPRE EL CORDÓN ANTES DE
INTENTAR REALIZAR CUALQUIER FUNCIÓN DE SERVICIO.
LIMPIEZA: Use un trapo y una solución de jabón suave, tal como
detergente líquido para lavar trastes.
ADVERTENCIA: No use gasolina, bencina, diluyente de pintura ni
limpiadores fuertes en aerosol, ya que éstos dañarán el ventilador.
:
ALMACENAMIENTO
Cuando no lo utilice, mantenga el aparato en
un lugar limpio y seco.
EL MOTOR HA SIDO PERMANENTEMENTE LUBRICADO.
2
1
3
5
6
4
15
14
15
13
12
18
Rev. A 6/99 (Motor)
PARTES DE REPUESTO
Ref. No. de Parte
Descripción
1
2010788
Cubierta del Motor (Trasera)
2
2010793
Botón del Interruptor
3
2090039
Tornillo de #8 x 3/8 Tipo 25 PPH
4
2091108
Tornillo de #8 x 3/4 Tipo AB HWH
5
2010786
Rejilla Trasera
6
2010790
Accesorio de Inserción de la Manija
7
2057067
Interruptor
8
2090710
Tornillo de #10 x 1/4 Tipo B
9
2050044
Cordón Eléctrico
10
2010949
Cubierta del Interruptor
11
2031229S
Conjunto del Motor
12
2010791
Trinquete
13
2010789
Horquilla
14
2091115
Arandela Planas 1 x .205 x .062
15
2091116
Tornillo de #8 x 5/8 Tipo 25 HWH
16
2010794
Hélice
17
2010792
Base
18
2090038
Tornillo de #8 x 9/16 Tipo 25 PPH
19
2010414
Pie
20
2010785
Rejilla Delantera
21
2091109
Tornillo de #6 x 3/4 Tipo 25 PPH
8
7
9
10
11
21
16
13
14
12
17
19
19
18
4
OPERATING INSTRUCTIONS & PARTS MANUAL
Cant.
1
1
2
5
1
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT
1
1
DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY
1
WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
1
1
1
2
2
2
2
1
1
2
4
1
2
DESCRIPTION
The AirKing 15" (38.1 cm) Deluxe Pivot Fan features 3 speed whisper-
quiet operation, a 5-paddle fan blade and 120° adjustable tilt. The fan
has a permanently lubricated motor with a 6 ft. (1.8 m) 18/3 cord set.
SPECIFICATIONS
Motor ................................... 120V, 60 Hz
Blade Diameter ................... 15" (38.1 cm)
Speeds ................................ 3
20
Control ................................ Rotary Knob
Air Flow Distribution ........... 120° Variable
Approvals ............................ UL listed. Close mesh fan guard meets
MODEL
SPEED
HIGH
CFM
3285
M
3
/s
1.55
RPM
1220
Amps
1.10
Watts
115
dB A
55
GENERAL SAFETY INFORMATION
1. Make certain that the power source conforms to the electrical
requirements of the fan.
2. The power cord is equipped with a three-prong grounded plug that
Rev. A 6/99 (Motor)
2084534
15 INCH DELUXE PIVOT FAN
15" (38.1 cm) MODEL 4TM64A/9515A
READ AND SAVE THESE INSTRUCTIONS
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
must be inserted into a matching receptacle. Under no circum-
stances must the grounding prong be cut off the plug. Where a two-
prong wall receptacle is encountered, it must be replaced with a
properly grounded three-prong receptacle installed in accordance
with the National Electrical Code (NEC) and all applicable local
codes and ordinances. This work must be done only by a qualified
electrician, using copper wire only.
WARNING: USE OF A THREE-PRONG TO TWO-PRONG ADAPTER
IS NOT RECOMMENDED. IMPROPER CONNECTION MAY CRE-
ATE THE RISK OF ELECTROCUTION. USE OF SUCH ADAPTERS
IS NOT PERMITTED IN CANADA.
3. Where possible, avoid the use of extension cords. If they must be
used, minimize the risk of overheating by ensuring that they are UL
listed and of the proper gage and length. Never use a single
extension cord to operate more than one fan.
4. Do not insert fingers or foreign objects into the fan. Do not block or
tamper with the fan in any manner while it is in operation.
5. Unplug power cord before installing or servicing the fan.
WARNING: DO NOT DEPEND UPON THE ON-OFF SWITCH AS THE
SOLE MEANS OF DISCONNECTING POWER WHEN INSTALLING
OR SERVICING THE FAN. ALWAYS UNPLUG THE POWER CORD.
6. This fan is intended for general use ONLY. It must NOT be used in
potentially dangerous locations such as flammable, explosive,
chemical-laden or wet atmospheres.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRICAL
SHOCK, DO NOT USE THIS FAN WITH ANY SOLID STATE SPEED
CONTROL DEVICE
OPERATION
1. ADJUSTABLE TILT: To adjust direction of air, simply turn the
head of the fan. The 120° ratchet adjustment will securely snap
and hold the fan in the desired position.
2. SPEED: Speed is controlled by three position rotary switch
located on rear of fan.
3. POWER SUPPLY CORD: Plug power supply cord into a wall
OSHA requirements.
outlet (AC 120 volts, 60 Hz).
THE RACHET ASSEMBLY ON THE 15" DELUXE PIVOT FAN IS
4TM64A/9515A
DESIGNED FOR POSITIVE LOCK POSITIONING. THEREFORE
MED
LOW
WHEN ADJUSTING THE FAN ANGLE A LOUD CLICKING SOUND
2830
2210
IS NORMAL.
1.34
1.04
MAINTENANCE
1050
750
WARNING: ALWAYS UNPLUG THE CORD BEFORE SERVICING.
.80
0.62
CLEANING
:
95
75
dish washing detergent.
50
44
CAUTION: Do not use gasoline, benzine, thinner, harsh cleaners,
etc. which will damage the fan.
Dry all parts with a soft cloth completely before reconnecting to power
supply.
:
STORAGE
When not in use, keep unit in a clean dry place.
MOTOR IS PERMANENTLY LUBRICATED.
1
Use a soft cloth and a mild soap solution such as liquid
2084534