Package Contents; System Requirements; Installing The Battery - GE 37823 Manual De Instrucciones

Package Contents

• 2.4GHz Wireless Mini Optical Mouse
with Nano Receiver
• 1 AA battery included
• Instruction Manual

System Requirements

• Windows 7 or higher
®
• Mac 10.6 or higher
• Available USB Port

Installing the Battery

1. Turn off the power switch located
on the underside of the mouse.
2. Remove the top of the mouse by
carefully prying up the top rear edge.
4. Insert the battery as shown, following
the polarity markings on the battery
compartment.
5. Replace the top of the mouse.
6. Turn on power switch.
Using the Nano Receiver
The nano receiver must be plugged into your
computer before you can use your wireless
mouse. It is stored inside the mouse, next to
the battery compartment.
1. Remove the top of the mouse by
carefully prying up the rear edge.
2. Remove the nano receiver from its
storage slot and replace the top of
the mouse.
3. Plug the nano receiver into the available
USB port on your computer.
4. Confirm mouse power switch is set to ON.
Move the mouse to confirm it is controlling
the cursor on your screen.
CAUTION
BATTERIES MAY LEAK HARMFUL LIQUIDS
OR IGNITABLE MATERIALS OR EXPLODE
CAUSING INJURY AND PRODUCT DAMAGE.
• DO NOT MIX OLD AND NEW OR OTHER
BATTERY TYPES.
• REPLACE ALL BATTERIES AT THE
SAME TIME.
• REPLACE FULLY DISCHARGED BATTERIES
IMMEDIATELY.
Lift carefully
to remove
top
nano
receiver
ON/OFF
switch