Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Installation instructions for part 99-3016G
Chevy Colorado, GMC Canyon 2015-up
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted gunmetal gray
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (8) #8 x 3/8" Phillips pan-head screws
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • GMOS-LAN-09 • LC-GMRC-LAN-09 • AX-LCD
Antenna Adapter: • 40-EU55
METRA. The World's best kits.
(Sub-dash modifications required)
99-3016G
C
D
metraonline.com
Table of Contents
Dash Disassembly ................................................. 2
Kit Preparation ....................................................... 2
Kit Assembly
– ISO DIN radio provision with pocket ...................... 3
TOOLS REQUIRED
• Cutting tool • Panel removal tool
• Phillips screwdriver • Socket wrench
CAUTION: Metra recommends disconnecting the negative battery
terminal before beginning any installation, unless the vehicle
manufacturer recommends against so. Please check with your
local Dealership for more information. All accessories, switches,
climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling
the ignition. Also, do not remove the factory radio with the key
in the on position, or the vehicle running. It would be best to
remove the key from the ignition and then wait a few seconds
before removing the factory radio.
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
Tabla de contenido
loading

Resumen de contenidos para Metra 99-3016G

  • Página 5: Chevy Colorado, Gmc Canyon 2015 Y Mas

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3016G Indice Chevy Colorado, GMC Canyon 2015 y mas (Se requieren modificaciones al sub tablero) Desmontaje del tablero ..........99-3016G Preparación del kit ..........2 Ensamble del kit – Provisión de radio ISO DIN con cavidad ....3 CARACTERÍSTICAS DEL KIT...
  • Página 6: Desmontaje Del Tablero

    99-3016G Desmontaje del tablero Preparación del kit 1. Desenganche y quite el panel de 1. Corte y quite las áreas moldura que rodea el panel del especificadas en el sub tablero. radio/control del clima. (Figura A) (Figura A) 2. Quite los (4) tornillos de 9/32” que Continúe con el ensamble del kit...
  • Página 7: Ensamble Del Kit

    7. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS.
  • Página 8: Importante

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-3016G IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones.

Tabla de contenido