Tabla de contenido
Idiomas disponibles
Idiomas disponibles
SET RAIN DELAY (WATERING DELAY):
•
With the dial in the RUN position, pressing (+) will cause
a 24 hour delay to the program.
•
Delays of 0, 24, 48 hours, and 72 hours are possible.
Delay time can be changed by pushing + or - at any time.
•
Display will flash between clock and hours remaining
before programmed cycle resumes.
•
To remove Watering delay, turn dial to OFF and then
back to RUN or reduce the delay time to 0.
MANUAL (INSTANT) WATERING
•
To water instantly without interrupting the set cycle, press
the
button to start watering.
•
This mode will function only when the dial is on RUN position
•
Press the + or - button to adjust from 0 to 240 minutes at
any time.
•
To resume programmed cycle, press the
or rotate the knob to OFF and back to RUN.
OFF
•
Turning the dial to the OFF position from any other
position will stop the Manual or programmed watering
immediately.
4
button again
Tabla de contenido
