Tabla de contenido
Idiomas disponibles
Idiomas disponibles
You can still use the "<<", "I<<", ">>I", ">>" keys on the remote control to shift the picture to the
left, right, up and down respectively.
19-20
>>I and I<< - Press the "I<<" key once and the player skips to the previous track. Press >>I key
once and the player skips to the next track. Keep the keys depressed and the player will
continuously skip backward and forward respectively.
21.
P/N - The key is used to switchover between PAL and NTSC systems.
22.
STOP - Press this key once stops the playback and the LCD panel displays the total number of
tracks and total playback time. (Subsequently the player will automatically power OFF in 30
seconds if no keys are pressed.) Press the key again the player is powered OFF.
10. LCD DISPLAY INSTRUCTION
1
To show the general index and MP3 index
2
To the track index and total track
3
To show the playing time
4
Batteries indicator:
• The icon will blink when the batteries are weak
• The icon will display long time when the batteries fully charged
5
In Electronics Shock Protection status
6
Means playing
7
II means pause
VCD
represents the unit playing the VCD disc.
PCB
represents the VCD displays the menu screen.
CD"
represents the unit playing the CD disc.
HOLD
represents the unit turn on the key lock / hold function.
PGM
represents the unit edit and play the edited programs.
RDM
represents the unit playing randomly.
REPEAT
represents the unit Repeat 1 or Repeat All to play.
11.TROUBLESHOOTING GUIDE
Check the following items before resort to repair service it you find your player is abnormal
PROBLEMS
Cannot close the door
Cannot play disc placed, LCD shows
no disc" or turn off after reading
The volume key doesn't work
Pagina 28
CHECK
1. Check the disc properly secured in place
1. Check the batteries inserted in the correct polarity
2. Check AC Adaptor connection at AC outlet and the back
No Power
side of set
3. The batteries are weak. Replace all the batteries with
fresh alkaline batteries
1.Check the RESUME, NORMAL, RANDOM (play mode)
slider in the NORMAL position.
2. Disc dirty. Clean the disc
3. Re-insert disc with label side facing up
4. Disc damaged. Do not use the disc again
5. Disc format not compatible with this player
6. Lens dirty Clean the lens with a special cleaning disc
7. The batteries are weak. Change new high capacity
batteries or recharge the batteries it they are rechargeable.
8. Check if the unit is in the HOLD status, Turn off the HOLD
button.
9. Check the door and close it securely.
1. For audio CD and CD-R (MP3), the player is designed to
show no picture.
2.Make sure the format or playing disc is VIDEO CD
3.The connection is correct or not. Make sure the yellow
No image
tack of AV cable is connected to VIDEO input of TV set.
Follow the instruction to reconnect with the TV
4.Select the right A/V channel and input jack of TV set
5.Check the AV cable is available
1. It is normal when playing paused or when searching.
2.Disc dirty. Clean the disc
3.Disc bad. Change to new and original disc
Image distortion
4.Is the player placed too close to the TV set or radio
receiver? (Move the player as tar away from the TV or radio
as possible)
1. Check the connections whether they are firmly connected
2. Adjust the volume knob to right position
3.The disc format is compatible or not.
No sound
4.Check the A/V cable connection
5.Select the right channel (R/L or stereo)
6.If the sound is muted. Press the MUTE key to exit the
mute function,
1. Check if the units is set in the HOLD status. Turn OFF the
HOLD button.
Pagina 29
Tabla de contenido
