Charging The Headphones - ifrogz AIRTIME VIBE Manual De Instrucciones

| Airtime Vibe Instructions
EN
Introduction
Airtime Vibe wireless active noise canceling (ANC)
headphones provide a fully immersive sound experience.
This quick start guide will teach you how to take advantage
of all the premium features.
Comfort-Fit Features
Airtime Vibe wireless ANC headphones have an adjustable
headband and earcups that rotate and hinge to give
you a customized fit. The headphones are designed to
sit comfortably on your head with the earcups angled
forward. When your headphones aren't in use, the earcups
collapse inward to fit easily in the carrying case.
Music and Call Controls
Buttons for music and call controls are located on the back
of the right earcup. The raised symbols on the Plus and
Minus buttons make them easy to navigate by touch.
Power button (Top)
· Long press – Power on/Power off/Deny call
· Double click – Voice control (Siri and Android)
· Quick press – Play/Pause/Answer call/End call
Plus button (Middle)
· Quick press – Volume up
· Long press – Track next song
Minus button (Bottom)
· Quick press – Volume down
· Long press – Track previous song
Using the Active Noise Cancelation (ANC)
The ANC button is on the front of the right earcup with
the letters NC on it. Press the button for two seconds to
activate noise cancelation. When the ANC is on, a white
LED will light beneath the button. To turn the ANC off,
press the button again for two seconds and the white
LED will go off. You can use the ANC feature to block out
ambient noise even when music isn't playing and the
headphones are turned off.
Pairing the Headphones with Your Device
1. Make sure your device's Bluetooth® connection is on.
2. Press and hold the Power button until the LED flashes
white and red, indicating pairing mode.
3. On your device, select "IFROGZ Airtime Vibe."
Complete any additional steps your device requires.
4. A white light will flash twice, indicating pairing is
complete.
5. To turn your headphones off, press and hold the
Power button for three seconds. The LED will turn
red quickly before they power off.

Charging the Headphones

To charge your Airtime Vibe headphones, connect the
micro USB end of the included charging cable to the
port on the bottom of the right earcup. Connect the USB
end of the charging cable to your preferred USB outlet.
The LED will be red while the headphones are charging.
When fully charged, the light will turn off until the charging
cable is removed.
Wired Listening
You can connect the headphones to your device for wired
listening by plugging the included auxiliary cable into
the 3.5 mm port on the bottom of the right earcup and
connecting the other end of the cable to your device.
Included in this Package
Airtime Vibe wireless active noise canceling headphones
Carry pouch
Micro-USB charging cable
Auxiliary cable