BOND MANUFACTURING HYMH20027-3 Manual Del Usuario página 6

ASSEMBLY INSTRUCTIONS
*If you have opened the carton and removed all packages, please disregard the STEP 1 and 2.
(1) Lift off the carton carefully
STEP 1.
and be wary of the accessories inside
falling away. Take away the box
containing lava rocks.
(2) Take all the packing materials away
except for the polyfoam rounding the top of
the firebowl.
See Figure STEP 1.
STEP 3.
(I)Make sure the gas valve is turned "OFF" before
assembling. Check each part before using the product.
To set the gas tank in the firebowl, screw it to the
regulator inlet fitting inside the firebowl.
See Figure I.
(II) Place the lave rocks on the burner averagely. See
Figure II.
(III) After assembling the gas tank, push and turn the
Control Knob counter-clockwise, then use a match or a
lighter to light the firebowl. To adjust the flame, turn
the Control Knob. Push and turn the Control Knob
clockwise to turn the flame off. See Figure I and III.
* Please keep this owner's manual for future reference.
See the STEP 3 directly.
Cut off the binding tape on the polyfoam and
STEP 2.
remove all the polyfoam rounding the top of the firebowl.
See Figure STEP 2.
6