LG 43LW540S El Manual Del Propietario página 27

20. Channel(Programme) Add/Del(Skip)
(Command: m b)
• To skip current channel(programme) for next
time.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Del(ATSC,ISDB)/Skip(DVB)
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
- Set the saved channel status to del(ATSC, ISDB)/
skip(DVB) or add.
21. Key (Command: m c)
• To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - page 17.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
22. Control Backlight, Control Panel Light
(Command: m g)
• For LCD TV / LED TV
• To control the backlight.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
• For Plasma TV
• To control the panel light.
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
23. Input select (Command: x b)
• To select input source for main picture.
Data
01 : Add
24. 3D(Command: x t) (only 3D models)
• To change 3D mode for TV.
(Depending upon model)
Data Structure
[Data 00] 00 : 3D On
[Data 01] 00 : Top and Bottom
[Data 02] 00 : Right to Left
[Data 03] 3D Effect(3D Depth): Min : 00 - Max : 14
(Main Picture Input)
Transmission [x][b][ ][Set ID][ ][Data][Cr]
00 : DTV
02 : Satellite DTV
ISDB-BS (Japan)
03 : ISDB-CS1 (Japan)
04 : ISDB-CS2 (Japan)
11 : CATV
20 : AV or AV1
40 : Component1
60 : RGB
90 : HDMI1
92 : HDMI3
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
- This function depends on model and signal.
(Depending upon model)
Transmission [x][t][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][ ][Data 03][Cr]
01 : 3D Off
02 : 3D to 2D
03 : 2D to 3D
01 : Side by Side
02 : Check Board
03 : Frame Sequential
04 : Column interleaving
05 : Row interleaving
01 : Left to Right
(*transmit by Hexadecimal code)
01 : CADTV
10 : ATV
21 : AV2
41 : Component2
91 : HDMI2
93 : HDMI4
27