Hydrotek Active Air Instrucciones página 2

Idiomas disponibles

Idiomas disponibles

GENERAL SAFETY INSTRUCTIONS
appliance should not be used without supervision by children or persons not able to use the appliance safely. Have any
SAFETY INSTRUCTIONS (ELECTRICITY AND HEAT)
• Verify that the main voltage is the same as that indicated on the type plate on the appliance before use.
• Plug the appliance into grounded wall sockets only.
• Always remove the plug from the socket when the appliance is not in use.
• Always remove the plug from the wall socket by pulling on the plug, not the power cord.
• Check the appliance's power cord regularly to make sure it is not damaged.
• Do not use the appliance if the power cord is damaged.
• Have a damaged power cord replaced by a qualified service department.
• When using an extension cord, always make sure that the entire cable is unwound from the reel.
• Use only approved extension cords.
• Prevent stumbling over the extension cord or power cord by ensuring that cords are stowed out of walking paths.
• Make sure that the appliance and the power cord do not come in contact with sources of heat, such as a heated
surface or an exposed flame.
• Make sure that the switch, the power cord and plug do not come in contact with water.
SAFETY INSTRUCTIONS (DURING USE)
• Never use appliance outdoors.
• Never use the appliance in an excessively humid room.
• Make sure that your hands are dry before touching the appliance, power cord or plug.
• Make sure that objects cannot contact the fan blades.
• Switch off the appliance and remove the plug from the wall socket in the event of a malfunction during use, and
before cleaning the appliance or storing it after use.
• Remove the plug from the wall socket immediately and replace the applicance should the appliance fall in water.
• Never immerse the appliance, the plug or the power cord in water or any other liquid.
ENVIRONMENT
packaging. The materials can be reused as indicated. Your help in the reuse, recycling or other means of making use of old
CE DECLARATION OF CONFORMITY
ITEM CODE
112010
6" Clip Fan
LIMITED WARRANTY
Hydrotek warrants the 112010 CLIP FAN to be free from defects in materials and workmanship. The warranty term is
Hydrotek
returned to the original place of purchase. To request warranty service, please return the 112010 CLIP FAN, with original
sales receipt and original packaging, to your place of purchase. The purchase date is based on your original sales receipt.
www.Hydrotek.ca
INSTRUCTIONS
VOLTAGE/FREQUENCY
100/240V @ 50-60 Hz
POWER
SPEED
5W
2100 rpm
112010 CLIP FAN covered under this warranty if it is
CONTROL
1 Speed + Stop
loading