English; Installation Instructions - ab PanelView Plus 400 Instructions

Mounting Levers
for PanelView Plus 400 and 600 Terminals
Catalog Number 2711P-RTFC

English

This document provides instructions on how to install the PanelView Plus 400 and
600 Terminals in a panel or enclosure using the 2711P-RTFC mounting levers. Eight
mounting levers are provided with kit.
The mounting levers hold the terminal tightly against the mounting enclosure. The
number of levers used for installation varies for each device.
Number of Levers
4
6
To install the mounting levers:
1. Insert all mounting levers (4 or 6) into the mounting slots of the terminal (as
shown below). Slide each lever until flat side of lever touches the surface of
the panel.
Mounting Slots
2. When all levers are in place, slide each lever an additional notch or two
until you hear a click.
Device
PanelView Plus 400 Keypad
PanelView Plus 600 Touch
PanelView Plus 600 Keypad or
Keypad/Touch
Flat Side of Lever

Installation Instructions

Clip Location
Top: Left and Right
Bottom. Left and Right
Top: Left, Middle and Right
Bottom: Left, Middle and Right
Mounting Lever
Publication 2711P-IN016A-MU-P