Maintenance And Care - Timberpro BLO-200 Manual Del Usuario

English
Do not let people enter your work area. This working area
should be minimum 15 meters, any less is dangerous.
7.1. POSITION AND GUIDANCE OF THE MACHINE
When you are working, hold the blower firmly with one hand
on the handle.
7.2. WORKING WITH THE BLOWER
Always follow the safety instructions given in this manual.
Start the blower and direct the air flow towards the leaves and
materials to be moved. Using the airflow, push these to the
preferred collection spot, a corner closed in by two walls.
Once gathered, shut the machine off and pick up the pile with
a shovel or a broom.

8. MAINTENANCE AND CARE

Make sure to always stop the engine, remove the cap and make sure
that the cutting mechanism is stopped before performing any checks or
maintenance.
ATTENTION! Do not modify the machine or the cutting parts.
Improper use of these parts may cause SERIOUS INJURY OR
DEATH.
Keep the machine clean, especially the areas close to the fuel
tank and the air filter.
Never make adjustments to th
Never make adjustments to the machine when it is running.
ance on th
Perform all maintenance on the machine when it is on a flat,
clear surface.
propriate spare
Always use appropriate spare parts, in order to obtain the best
operation and to avoid damage and risks to the machine and/or and to avoid
the user. The use of non original spare parts may risk accidents, the user. Th
parts may risk accidents, pers personal injury and breaking the machine.
Do not adjust the carburetor yourself. If you have problems with
the carburetor, contact a TIMBERPRO authorized dealer
Do not adjust the carbure
Adjustment of the carburetor is complicated.
with the
Therefore we recommend that this is done by a TIMBERPRO
authorized dealer. Incorrect adjustments may cause
refore, we
damage to the engine which will void the guarantee.
authorized dea
may cau
You may cause accidents You may cause accidents, personal injury, and breaking the machine
f you remove the
if you remove the safety systems, perform poor maintenance or
substitute spare parts by non-original parts. substitut
8.1. PERIODIC MAINTENANCE
PERIODIC MAINTENAN
Perform periodic inspections of the machine, to make sure it is
Perform periodic inspecti
operating properly. For a complete checkup, we recommend that
sure it is operating properly. F
you bring the machine to a TIMBERPRO authorized dealer.
hat you bring the
Always use appropriate spare parts, in order to avoid damage and
lways use appropriate spar
risks to the machine and the user. The use of non original spare parts
damage and risks to the mach
may risk accidents, personal injury and breaking the machine.
non original spare parts may ri
13/109
achine
achine
rts, in order to obtain
amage and risks to the
se of non original spare
al injury and breaki
yourself.
rburetor, contact a
Adjustment of the carburetor
commend that this is done by
damage to the
ersonal injury, and breaking
fety systems, perform
pare parts by
s of the machine, to make
a complete checkup, we
chine to a TIMBERPRO
parts,
e and the user. The use of
accidents, personal injury