STACK-ON PC-1702-RFID Manual De Instrucciones página 4

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

USING THE
ELECTRONIC COMBINATION
• For security you must program your own
combination after opening the case.
• Record your new combination on this form
or store your combination on our secure
website at stackon.com under Customer
Service.
If you write down your combination you must
keep this information in a secure place, away
from children, not inside the case.
1.
Press the Reset Button (3) located inside
the case. Two "beeps" will sound (if the
sound is turned on) and all 3 buttons will
flash blue twice. You will have 5 seconds
to begin entering your combination or you
will have to start over.
Enter your own 3-8 button combination by
2.
pressing any combination of the 3 buttons.
Example: (RIGHT) - (LEFT) -
(CENTER) - (LEFT) - (RIGHT)
3.
For Each combination entry a "beep" will
sound (if the sound is turned on) and all
the buttons will light up green. If you
delay more than 5 seconds between
entries there will be 3 beeps (if the sound
is turned on) and 3 red flashes and you
will have to start over from step 1. After
you have finished entering your
combination, you will have 5 seconds to
press the Reset Button to record your new
combination or you will have to start over
from step 1.
When you press the Reset Button to record
your new combination, there will be two
"beeps" (if the sound is turned on) and all
3 buttons flash blue twice, indicating your
new combination has been recorded.
4.
To confirm your combination was entered
correctly, turn the key to the locked
position (the lid may remain open) and
follow the instructions in the "OPENING
THE CASE USING YOUR COMBINATION"
section.
If the combination you entered does not
activate the locking mechanism, you will
need to go back to step 1 in this section.
OPENING THE CASE USING
ELECTRONIC COMBINATION
Enter your combination using the buttons.
The buttons will light up green and there
will be one "beep"(if the sound is turned
on) for every entry. If you entered the
correct combination, the buttons will flash
green twice, with two beeps and the door
will open. If the combination is incorrect
the case will beep 3 times (if the sound is
turned on) and the red light will flash
3 times.
NOTE: You will have 2 seconds between
individual entries before the case assumes
you have entered your complete
combination.
If an incorrect security code is entered 3
times the case will beep 5 times (if the
sound is turned on) and the red light will
flash 5 times resulting in the case being
automatically locked out for 60 seconds
before you can try your code again. The
case will beep one time (if the sound is
turned on) and the green light will flash
once when the lockout period is over.
If the incorrect security code is entered 1
additional time the case will beep 5 times
(if the sound is turned on) and the red light
will flash 5 times resulting in the case being
automatically locked out for 5 minutes
before the code can be tried again. The
case will beep one time (if the sound is
turned on) and the green light will flash
once when the lockout period is over.
The case may still be opened using the
supplied Key to override failed security code.
To close the case, push the lid closed until
locked.
4
16
40720-1704
Tabla de contenido
loading

Tabla de contenido