Idiomas disponibles
Idiomas disponibles
1.
Contents of the kit
You will find the following items in the solar panel packing
(see fig1):
- 1 photovoltaic module 12V-25W
- 5 m of cable H07 RNF 2x 1.5 mm
- 1 adaptable support on a 35mm diameter pole
consisting of:
- 2 bent brackets in aluminium 60/10 -angle 60°
- 1 round tube in aluminium, machined at the
centre
- 2 short brackets M6 x 50 for securing the bent
brackets on the tube
- 1 long bracket M6 x 85 for securing the tube on
the pole
- 1 bag of fitting items containing:
- 4 screws M6 x16
- 10 flat washers M6
- 10 nuts H-M6
- 6 Grower washers M6
-1 installation instructions
Bent brackets 60/10 Aluminium tube
Bag of fitting items
DOMOSOLAR SOLAR PANEL
Short brackets M6 x 50
Long bracket M6 x 85
2.
Orientation and inclination
To obtain the best performance from your solar panel,
you must respect the orientation and inclination in
keeping with the geographic zone of the installation.
Make sure that the zone you have chosen is not
shadowed in any part of the day.
For Europe:
The panel must be oriented southward at a 60°
inclination with respect to the ground (see fig1).
3.
Installation and connections
Install the solar panel on the support, with the
connection box facing upward..
·
Installation at the top of a wall
Only two securing brackets must be used. Secure the
longer side of the bracket on the panel.
·
Installation on a 35mm diameter pole.
Install, assembling the parts as shown in the drawing.
5 m cable
Photovoltaic module.
3
FIG1
