Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
motor housing (E) and remove the
impeller. (see picture 7) Rinse out
the pump and clean the impeller.
After cleaning replace the impeller
and reassemble the motor housing
to the filter unit. Install the filter in
the aquarium again and plug in the
unit.
When adding tap water to the
aquarium you should add Tetra
®
AquaSafe
in order to neutralize
substances that are harmful to fish
such as chlorine and heavy metals.

2 Year guarantee

Thanks to advanced production
technology, high-quality con-struc-
tion and very strict quality controls
we can allow a 2 year guarantee
on the problem-free working of the
®
Tetra
EasyCrystal
date of purchase. Please keep your
receipt! Guarantee does not cover
improper use, normal wear and
tear and any modifications made
by the purchaser to the appliance.
In case of complaints please con-
tact your local retailer or Tetra
Box 271, Southampton, SO18 3ZX.
®
®
Filter, from the
PO
®
Safety
regulations,
important!
Before carrying out a water
change or any maintenance to the
device always isolate the Tetra
®
EasyCrystal
Filter and any other
electronic unit from the mains
electricity. The control unit can-
not be replaced. If this is damaged
the filter must no longer be used.
®
The Tetra
EasyCrystal
only designed for use in tempera-
tures which do not exceed 35°C.
The electricity cable cannot be
replaced. If the cable is damaged,
the appliance should be scrapped.
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of ex-
perience and knowledge, unless
they have been given supervision
or instruction concerning use
of the appliance by a person re-
sponsible for their safety. Children
should be supervised to ensure
that they do not play with the ap-
pliance.
Tetra GmbH
D-49304 Melle, Germany
www.tetra.net
UK
®
®
Filter is
7
Tabla de contenido
loading

Tabla de contenido