CD/ RADIO
Selecting a different track during playback
The track number appears briefly in the display when
you press SEARCH ∞ or § to skip tracks.
• Press SEARCH § once or more to skip to the next
track(s).
• Press SEARCH ∞ more than once to skip to
previous tracks.
• Press SEARCH ∞ once and playback will return to
the beginning of the current track.
Finding a passage within a track
1 During playback, press and hold down
SEARCH ∞ or §.
™ The CD is played at high speed and low volume;
the display will show Cd: and your current track
number.
2 Release SEARCH ∞ or § when you recognize the
passage you want.
™ Normal CD playback and standby clock time
resumes.
RADIO
1 Press ON/ OFF to switch on the radio.
™ tu is displayed briefly followed by the clock time
, and the last selected waveband.
RADIO
2 Press FM/ AM if you wish to change waveband.
3 Adjust the sound using VOLUME $ or 3.
4 Adjust the TUNING wheel to tune to a radio station.
To improve reception:
FM: Extend pigtail at the back of the set fully for
optimum reception.
AM: uses a built-in antenna. Direct the antenna by
adjusting the position of your set.
5 Press ON/ OFF to switch off the radio.
™
and the waveband disappear from the
RADIO
display.
SETTING ALARM OPTIONS
SETTING THE ALARM OPTIONS
General
Two different alarm times, ALARM 1 or 2 can be set in
the CD, radio or buzzer modes. This can be useful when
for example you need to be woken up at a different
time during the week and at the weekend.
- Remember to first set the DAY, clock and alarm time
functions correctly!
- Make sure your selected alarm symbol is shown.
Viewing the Alarm Mode Options
1 Select your choice of alarm mode by pressing
ALARM 1 or ALARM 2 MODE/ OFF once or more to
find your respective mode.
™ The alarm mode display sequence is shown:
– Lo:00 – default volume level for start of gentle
wake alarm
– H1:16 – default maximum volume level for
gentle wake alarm
– Followed by the 3 different alarms:
(buzzer) k AL, or
(radio) m tu, or
CD mode
with CD and a track number 1-99.
2 Read the following chapters to adjust or select the
respective modes.
Adjusting the Gentle Wake Volume
A sure way of getting up in the mornings, the gentle
wake volume for the alarm begins from gentle volume
e.g Lo:00 (low) and gradually increases to a higher
volume e.g. H1:11.
The default volume range is Lo:00 and H1:16. If
you wish to change the default volume for the buzzer,
radio or CD alarm:
1 In the standby mode, press ALARM 1 MODE/ OFF
or ALARM 2 MODE/ OFF once.
2 As soon as Lo:00 appears, press 7 or 8 once or
more to adjust the starting volume of your alarm.
3 To set the maximum volume for your alarm, press
ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF
again to change to the H1:16 display.
4 As soon as H1:16 appears, press 7 or 8 until you
reach the desired volume level (10-32).
Notes:
• The HI volume is always greater or equal to the Lo
volume: e.g.i. Lo:15, H1:19
e.g.ii. Lo:12, H1:12
• The starting volume is Lo:00, with a possible low
volume range 00-32, and the maximum volume is
H1:32, with a possible high volume range
10-32.
• The gentle wake volume settings do not affect
normal CD and radio playback volume level.
• It is not possible to review the gentle wake volume
range during the active alarm call as pressing
ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF
cancels the alarm completely.
• During the alarm call, if you press 7 or 8 the high
volume stops increasing immediately.
Selecting Buzzer or Radio Alarm
• Press ALARM 1 MODE/ OFF or ALARM 2 MODE/
OFF repeatedly until the (buzzer) k AL or
(radio) m tu display is shown.
Note:
If you have selected the radio alarm m tu, make sure
you have tuned properly to a station.
CD Alarm Mode: Selecting a CD track
You can program and select a CD track number between
1-99, when the set is in the standby or radio playback
mode.
However, if the track number programmed does not
exist on your CD, the CD will start playback from the
first track during the alarm call.
1 Insert a CD into the CD compartment.
2 Press ALARM 1 MODE/ OFF or
ALARM 2 MODE/ OFF repeatedly until the CD and
track number display is shown.
See figure 3.
3 As soon as the CD alarm display appears,
press 7 or 8 until the desired track number is shown.
™ The display returns to standby clock time.
4 To review your programmed track number, press
ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF
again repeatedly until the CD alarm display is shown.
SWITCHING OFF ALARM
Note:
• The buzzer alarm option will automatically replace
the CD alarm if you have:
– inserted a CD incorrectly;
– inserted a damaged CD;
– forgotten to insert any CD;
– not closed the CD door properly.
SWITCHING OFF THE ALARM
There are three ways of switching off the alarm. Unless
you cancel the alarm completely, the 24 HOUR ALARM
RESET will be automatically selected after 59 minutes,
from the time your alarm time first goes off.
24 HOUR ALARM RESET
If you want the alarm mode to be stopped immediately
but also wish to retain the same alarm setting for the
following day:
• Press from 3 possible options according to your
selected alarm:
a 24 HR RESET to switch off the buzzer, radio or
CD alarms
b STOP 9 CD alarm only
c ON/ OFF radio alarm only.
™ You will hear a beep tone confirming 24 hour reset
activation.
CANCELING THE ALARM COMPLETELY
To cancel the set alarm time before it goes off, or during
the alarm call:
• Press ALARM 1 MODE/ OFF or ALARM 2 MODE/
OFF once or more until the selected alarm indicator
disappears from the display.
™ If you cancel the alarm during the alarm call, you
will also hear a beep tone confirming the alarm
has been cancelled.
REPEAT ALARM
This will repeat your alarm call at 9-minute intervals.
• During the alarm call,
press REPEAT ALARM/
BRIGHTNESS CONTROL
• Repeat if desired up to an hour.
Notes:
• The selected alarm mode k, m , or
indicators will
.
