SKF 729659 C Instrucciones De Uso página 6

1. Introduction
The SKF electric hot plate 729659 C is intended for heating bearings and other machinery
components prior to mounting. It is suitable for components with a bore of up to
approximately 100 mm (4 inch) or with a weight of up to 3–4 kg. The hot plate has a
maximum temperature of 200 °C (390 °F) and is equipped with a lid for retaining the heat,
at the same time dirt is prevented from entering the bearing.
2. Description
The electric hot plate 729659 C consists of a heating plate housed in a metal casing with
removable cover. The temperature is controlled by means of a thermostat.
A
B
C
D
A. Lid
B. Thermostat
4
110 °C / 23°F
ON
Bearing Heater 729659C
OFF
400
C.
D.
Heater indication lamp
Power switch
SKF 729659 C
240
50
80