Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Super-Vee™
5. Do not abuse the cord. Never use the cord to
carry the tools or pull the plug from an outlet.
Keep cord away from heat, oil, sharp edges or
moving
parts.
immediately. Damaged cords increase the risk
of electric shock.
6. When operating a power tool outside, use an
outdoor extension cord marked "W-A" or "W".
These cords are rated for outdoor use and reduce
the risk of electric shock.
7. Use only three-wire extension cords which
have three-prong grounding plugs and three-
pole receptacles which accept the tool's plug.
Use of other extension cords will not ground the
tool and increase the risk of electric shock.
8. Use proper extension cords.
conductor size will cause excessive voltage drop
and loss of power.
9. Keep all electric connections dry and off the
ground. Do not touch plugs or tools with wet
hands. Reduces the risk of electric shock.
Personal Safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use tool while tired or under the
influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or
jewelry. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Loose clothes, jewelry, or long hair can be caught
in moving parts.
3. Avoid accidental starting. Be sure switch is
off before plugging in. Plugging in tools that
have the switch on invites accidents.
4. Remove adjusting keys or switches before
turning the tool on. A wrench or key that is left
attached to a rotating part of the tool may result in
personal injury.
5. Do not overreach. Keep proper footing and
balance at all times. Proper footing and balance
enables better control of the tool in unexpected
situations.
6. Use safety equipment.
protection. Dust mask, non-skid safety shoes,
hard hat, or hearing protection must be used for
appropriate conditions.
Tool Use and Care
1. Do not force tool. Use the correct tool for your
application. The correct tool will do the job better
and safer at the rate for which it is designed.
2. Do not use tool if switch does not turn it on or
off. Any tool that cannot be controlled with the
switch is dangerous and must be repaired.
Replace
damaged
Insufficient
Always wear eye
3. Disconnect the plug from the power source
before making any adjustments, changing
accessories, or storing the tool.
cords
preventative safety measures reduce the risk of
starting the tool accidentally.
4. Store idle tools out of reach of children and
other untrained persons. Tools are dangerous
in the hands of untrained users.
5. Maintain tools with care. Keep cutting tools
sharp and clean. Properly maintained tools, with
sharp cutting edges are less likely to bind and are
easier to control.
6. Check for misalignment or binding of moving
parts, breakage of parts, and any other
condition that may affect the tool's operation.
If damaged, have the tool serviced before
using.
maintained tools.
7. Use only accessories that are recommended
by
Accessories that may be suitable for one tool may
become hazardous when used on another tool.
8. Inspect tool and extension cords periodically
and replace if damaged.
increase risk of electrical shock.
9. Keep handles dry and clean; free from oil and
grease. Allows for better control of the tool.
10. Store tools in dry place. Such measures reduce
the risk of electrical shock.
Tool Service
1. Tool service must be performed only by
qualified
maintenance performed by unqualified repair
personnel could result in injury.
2. When servicing a tool, use only identical
replacement parts. Follow instructions in the
Maintenance section of this manual. Use of
unauthorized
Maintenance Instructions may create a risk of
electric shock or injury.
Specific Safety Information
1. Be sure that the unit is plugged into a properly
grounded receptacle.
receptacle before plugging in machine. Check the
power cord to see that there are no cuts or frays.
3
Many accidents are caused by poorly
the
manufacturer
repair
personnel.
parts
or
Such
for
your
model.
Damaged cords
Service
or
failure
to
follow
If in doubt, check
Tabla de contenido
