Care And Maintenance - Kenmore 127.96012610 Manual De Uso

CARE AND MAINTENANCE

CLEANING
CAUTION: Before cleaning the heater be sure to disconnect power cord and allow
the heater to cool completely.
The heater comes with an air filter located beneath the air inlet grill on the back of the
heater. Periodically remove the grill and look at the filter to see if it is dirty. Remove a
dirty filter from the heater. In most cases brush debris from filter surface and replace
in heater. If filter is very dirty, rinse it out with warm water. Be sure to allow the filter to
dry completely before replacing in heater.
The heater should be cleaned at least once a year to maintain proper performance.
Clean the outside surface with a damp cloth. Allow heater to dry completely before
use. Do not use harsh chemical or abrasive cleaners.
WARNING: To prevent personal injury or heater malfunction, NEVER immerse the
heater in water.
CAUTION: Do not operate the heater without the air filter grill in place. Do not
use the heater if it has malfunctioned or become damaged in any way.
REPAIR
Do not attempt to open the heater to clean or otherwise service the inside. If the heater
does not function normally, call the following customer assistance number to arrange
for possible heater service and repair: 1-866-877-1889
STORAGE
Keep original carton for storage of the heater. Coil and tie the power cord to avoid
damage during storage.
8
NOTES
9