Home Decorators Collection OMSID 204294444 Manual De Instrucciones página 5

INSTALATION & ASSEMBLY:
1. Shut off power at the fuse box or circuit breaker box. Remove the
old fixture, including the mounting hardware.
2. Carefully unpack your new fixture and lay out all the parts on a
clear surface. Take care not to lose any small parts necessary for
installation.
3. Pull the power Supply Wires out from the Outlet Box. Attach the
Mounting Bracket to the Outlet Box using the Bracket Mounting
Screws. Turn the swivel on the Mounting Bracket to align it
horizontally. Tighten the swivel screw (Fig. 1).
4. Strip approximately ¼" of insulation from each supply and fixture
wire.
Bracket Mounting Screw
Mounting Bracket
Turn Swivel
Power Supply Wires
Fig. 1
Wall
Outlet Box
Page 5