B-550 Bubble King™ QRG
Mounting Before mounting this product, read the Safety Notes. Place bubbler on a flat,
AC Power This product has a voltage-specific power supply that can work with an input
Fuse
Replacement
level surface or use the mounting brackets provided. Ensure that the bubbles
are not shooting directly in anyone's face or above heavy traffic areas, as
bubble fluid leaves a slippery surface. The bubble machine must not have
more than a 5° angle of inclination.
voltage of 120 VAC, 60 Hz or 230 VAC, 50 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
1.
Disconnect the product from power.
2.
Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3.
Pry the fuse holder out of the housing.
4.
Remove the blown fuse from the holder.
5.
Replace with a fuse of the exact same type and rating.
6.
Insert the fuse holder back in place and reconnect power.
4
EN