Working Instructions; Environmental Protection - Würth RW 1010 Traducción Del Manual De Instrucciones De Servicio Original

Working instructions

Which stirring attachment [10] is appropri-
ate, depends largely on:
Material to be
stirred
Paint, varnishes, priming
coats, bitumen
Ready mixed plaster,
mortar, gypsum, fillers
Plaster, concrete, floor
screeds, insulating
material
Ready-mixed mortar, tile
adhesive, floor adhesive
Reduce the speed when immersing the stirring
■
attachment in the material to be stirred or when
removing it. Stir the material by moving the
device up and down.
Clean the stirring attachment after use.
■
Maintenance / Care
Important!
Unplug prior to any work done on the
device.
Important!
Never clean the device with water -
Risk of electric shock!
Clean the device and the stirring attachment
■
after use.
Remove the stirring attachment after finishing
■
your work.
Keep the ventilation slots clean and clear of
■
obstructions to ensure sufficient cooling.
Obstructed ventilation slots lead to the destruc-
tion of your device.
12
Stirring attachment
R I
For liquid
material
R II For viscous,
sticky material
M I
For heavy
material
M II For slightly
pulverized and
sticky material

Environmental protection

Do not dispose of the appliance with
domestic waste. Have the device
disposed of by an authorised waste
management company or your
municipal waste management
organisation. Adhere to the applica-
ble regulations. In case of doubt
contact your waste management organisation.
Recycle all packaging material in an environmen-
tally friendly manner.
Warranty
This Würth device is covered by warranty according
to the applicable national regulations. The warranty
period begins on the date of purchase (please retain
invoice or delivery note as proof of purchase).
Faults covered by warranty shall be eliminated by
replacement or repair. Damage caused by improper
operation is not covered by warranty.
Claims can be recognised only if the device is in a
non-disassembled state and presented to a Würth
branch office, your Würth sales representative or a
customer service office authorized by Würth. Techni-
cal changes reserved.
We accept no liability for printing errors.
Spare parts
In the unlikely event of a failure or defect, have
the device repaired by a Würth masterService
workshop.
In all your queries and spare part orders, always
quote the product number (see type plate) of your
device.
The current spare part list of the device can be
viewed online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.