Power Connector Introduction; Installation Steps - Thermaltake Litepower Serie Manual Del Usuario

Litepower Series PSU
3.

Power Connector Introduction

P/N
Wattage
20+4pin Main
Connector
4pin +12V CPU
Connector
8pin +12V CPU
Connector
6pin PCI-E
Connector
SATA
Connector
Peripheral
Connector
Floppy
Connector
Connector Type
MODELS
24pin
350W /
ATX 12V 4pin
450W /
500W
EPS 12V 8pin
350W
Molex & FDD
450W / 500W
350W
SATA
450W / 500W
350W
PCI-E 6pin
450W / 500W
Thermaltake Litepower Power Supply
03
>> >>
ATX12V 2.3 Version
W0292 W0293 W0294
350W 450W 500W
1 1 1
1 1 1
0 0 1
1 1 2
2 4 4
5 5 5
1 1 1
Connectors & Cable length
1 x 24pin Main connector:
W0293 / W0294 (400mm) ,W0292 (350mm)
1 x ATX 12V 4pin connector:
W0293 / W0294 (400mm) , W0292 (350mm)
1 x EPS 12V 8pin connector:
W0294 (400mm)
5 x Peripheral & 1 x FDD connectors:
(350mm+100mm+100mm+100mm+100mm+100mm)
5 x Peripheral & 1 x FDD connectors:
(400mm+100mm+100mm+100mm+100mm+100mm)
2 x S-ATA connectors:
(350mm+100mm)
4 x S-ATA connectors:
(400mm+120mm+120mm+120mm)
1 x 6pin PCI-E connectors:
(350mm)
2 x 6pin PCI-E connectors:
(400mm+100mm)
Litepower Series PSU

4. Installation Steps

Note: Make sure that your system is turned off and unplugged.
Disconnect the AC power cord from your old power supply.
1. Open your computer case; please refer to the direction in your
case manual.
2. Install the PSU into the case with the four screws provided.
3. Connect the 24 pin Main Power Connector to your motherboard
and peripheral. If your motherboard uses a 20-pin connector,
detach the 4-pin attachment on the 24-pin connector. Note: The
detachable 4-pin section cannot be used in place of a 4-pin +12V
connector.
4. Connect the 8-pin or 4-pin connector for the CPUs.
5. Connect other peripheral power connectors to devices such as
hard drives, optical drives, etc.
6. Close your computer case and connect the AC power cord to the
power supply AC inlet.
Thermaltake Litepower Power Supply
>> >>
ATX12V 2.3 Version
04