Safety Instructions - BAUKER PWM800-2 Manual De Instrucciones

WARNING: Failure to comply with safety instructions when operating the heat
tool can cause res, explosions, electric shock or burns. Read the operation instructions
before using the tool and always observe safety regulations. Please, keep these
instructions and give them to people who have not been trained before using the tool.
Safety
instructions
WARNING: A damaged or open tool can cause serious electric shock. Do not open the
unit and do not operate it if it is damaged.
WARNING: A damaged cord can cause serious electric shock. Check the power
cord regularly. Do not operate the unit when the power cord is damaged. Always request the
change of damaged power cord to a quali ed specialist. Do not roll the power cord up in the
unit and protect it from oil, heat and sharp edges. Do not pull the cord to unplug the unit.
WARNING: Do not operate under the rain or in wet or damp environments. This
can cause serious electric shock. Store it in a dry place when it is not in use. Please,
consider the weather conditions. Do not operate in wet sanitary facilities. Avoid body contact
with cables or grounded surfaces, such as pipes, radiators, stoves and refrigerators.
33
WARNING: Connect the power tools to a network that is protected by a
residual current circuit breaker (RCCB).
WARNING: Danger of explosion! The heat tool can ignite explosively
combustible liquids and gases. Do not operate in potentially explosive environments.
Check your surroundings before starting the tool. Do not work with fuel or gas
containers in your surroundings, even if they are empty.
WARNING: Fire hazard! Unsupervised heat tools can burn nearby
objects. The unit must be always supervised during operation. To cool the unit down,
keep it always in its holder. Let the unit cool completely.
WARNING: Fire hazard! When working on plastic elements, or near
varnishes or similar materials, highly ammable gases are generated, which can
cause explosions. You must be prepared for the ames that may burst out and always
keep the proper re ghting equipment at hand.
WARNING: Danger of poisoning! When working on plastics or similar
materials, aggressive or toxic gases can be generated. Avoid inhaling fumes, even
when they appear to be harmless. Provide good ventilation in the work area or wear a
respirator.
Safety
instructions
34