Tabla de contenido
GB
Faulty and/or discarded electrical or electronic apparatus have to be collected at the
appropriate recycling locations.
Special safety instructions
•
Always keep the cord away from the moving parts of the machine.
•
In the case of locking, switch the machine off immediately and remove the plug from the
mains.
•
Compare the maximum number of revolutions allowed of the accessories with the
number of revolutions of the machine.
•
When you put the machine away the engine must be switched off and moving parts must
have reached a standstill.
•
Never attach an assembly spanner to your machine with a piece of string or anything
similar.
•
Never use the axle locking button if the machine is operating.
•
Make sure that the spring chuck diameter is the same as the axle diameter of the
accessory.
•
Use a clamping device for securing the work piece.
•
Keep your hands away from the work piece.
•
Check that the maximum speed indicated on the grinding disc corresponds to the
maximum speed of the machine. The speed of the machine must not exceed the value on
the grinding disc.
•
Make sure that the dimensions of the grinding disc correspond to the specifications of the
machine.
•
Make sure that the grinding disc has been mounted and fastened properly. Do not use
reducing rings or adapters to make the grinding disc fit properly.
•
Treat and store grinding discs in conformance with the supplier's instructions.
•
Do not use the machine for grinding workpieces with a maximum thickness exceeding the
maximum grinding depth of the grinding disc.
•
Do not use grinding discs for deburring.
•
When grinding discs have to be mounted on the thread of the spindle, make sure that the
spindle has sufficient thread. Make sure that the spindle is sufficiently protected and does
not touch the grinding surface.
•
Before use, inspect the grinding disc for any damage. Do not use grinding discs which are
crack-ed, ripped or otherwise damaged.
•
Before use, let the machine run idle for 30 seconds. Immediately switch off the machine in
case of abnormal vibrations or occurrence of another defect. Carefully inspect the
machine and grinding disc before switching the machine on again.
•
Make sure that sparks do not put people into danger or that they contact highly flammable
substances.
•
Make sure that the workpiece is sufficiently supported or clamped. Keep your hands
away from the surface to be cut.
•
Always wear safety goggles and hearing protection. If desired or required also use
another kind of protection like for example an apron or helmet.
•
Ensure that mounted wheels and points are fitted in accordance with the manufacturer's
instructions.
•
Ensure that blotters are used when they are provided with the bonded abrasive product
and when they are required.
06
Uso ecológico
Para prevenir los daños durante el transporte, el aparato ha sido embalado. Dicho embalaje
está hecho, en la medida de lo posible, de material reciclable. Le rogamos, por lo tanto, que
recicle dicho material.
Cualquier aparato eléctrico o electrónico desechado y/o defectuoso tiene que
depositarse en los lugares apropiados para ello.
Garantía
Lea atentamente las condiciones de garantía indicadas en la tarjeta de garantía que aparece
en este manual de instrucciones.
Ferax
Ferax
ES
55
Tabla de contenido
