Instructions Of Use - Domo DO-324A Manual Del Usuario

ERROR CODES
Following error codes can be displayed on your airco :
E1 : the sensor for the room temperature is not working. Turn off the unit and
-
remove the plug from the socket. Wait for 10 sec and plug the unit back in.
Turn on the unit. When the error codes repeats, you need to contact the after
sales service.
E2 : The sensor of the dehumidifier doesn't work. Turn off the unit and re-
-
move the plug from the socket. Wait for 10 sec and plug the unit back in.
Turn on the unit. When the error codes repeats, you need to contact the after
sales service.
E4 : The display is not functioning properly. Remove the plug from the sock-
-
et. Wait for 10 seconds. Plug the unit back in. When the error codes repeats,
you need to contact the after sales service.
P1 : The water tank is full. Connect the drain hose to the bottom drain and
-
remove the water. When the error codes repeats, you need to contact the after
sales service.

INSTRUCTIONS OF USE

1. COOL function
Press the "mode" touch until the "cool" indication light turns on.
Use the arrow touches to select the desired room temperature.
Use the "fan" touch to select the desired air speed.
2. DRY function
Press the "mode" touch unit the "dry" indication light turns on.
With the selection you can't select te temperature or fan speed.
Keep windows and doors closed for an optimal dehumidification.
3. AUTO function
When the airco is in the "auto" mode, the airco will automatically make a se-
lection between "cool" or "fan" function, depending on the room temperature
and the selected temperature.
The airco will automatically stabelise the room temperature on the selected
temperature.
When using the "auto" function, you can't select the fan speed.
4. FAN function
Press the "mode" touch until the fan indication light will turn on.
Press the "fan" touch to select the air speed.
The temperature can't be selected.
You don't need to attache the air outlet hose.
59
DO-324A