Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Storage
1. Unplug the product before cleaning.
2. Let the product cool off completely.
3. Clean various parts of the product as follows:
Water tank: Rinse the water tank with a vinegar solution. If necessary, use a
bottle brush for cleaning. Rinse the water tank with warm water to remove
any vinegar residue.
Exterior surface and mist nozzle: Wipe clean the external surfaces with a
damp cloth. A mild cleaning solution can be applied for stubborn dirt.
Aroma pad: Clean it gently in warm water and allow it to air dry thoroughly.
4. Let all parts dry completely before next use.
Cleaning the water filter
1. Make sure the product is switched off and the power adapter
disconnected from the base unit
2. Remove the water tank cap from the water tank
filter
11
(see Fig. E).
3. Unscrew and remove the water filter (see Fig. K).
4. Wash the water filter in some warm soapy water.
5. Rinse the water filter thoroughly in clean water.
6. Screw the water filter back onto the water tank cap (see Fig. L)
7. Reattach and tighten the water tank cap to secure the water filter inside the
water tank.
Replacing the water filter
The water filter should be replaced with a new one once a year. For directions
on how to remove and then attach a water filter, see the chapter "Cleaning the
water filter". Replacement water filters can be purchased via our After Sales
Support.
Storage
All parts must be completely dry before being stored.
− Always store the product in a dry area.
− Protect the product from direct sunlight.
− Store the product so that it is not accessible to children.
16
7
and the power outlet (see Fig. B).
2
9
is
to access the water
Tabla de contenido
