Memory Function; Feature Settings - Directed 3121 Guia Del Usuario

Enter Valet Mode
Turn the ignition ON and then OFF 2 times, and press and hold
and within 5 seconds. The siren will chirp once, and the system
will enter valet mode. In valet mode, the LED will stay on solid for
1 hour, and then will shut off to reduce current draw. In valet mode
if you press the
A U X
1-hour solid LED cycle ends, the LED will also flash 3 times when
the button is pressed.
Note: Use the same method to exit valet mode.

Memory Function

This security system will store its current status to non-volatile mem-
A U X
ory. If power is lost then reconnected, the system will recall the
stored status from memory. This means if the unit is in valet mode
and the battery is disconnected for any reason, such as servicing
the motorcycle, when the battery is reconnected the unit will still be
in valet mode. This applies to all statuses of the system including
disarm, and valet mode. If the system is armed and the battery is
reconnected, the system will trigger.

Feature Settings

1. With system disarmed, turn the ignition to ON, and press
and hold
LED will flash once per second to indicate system entered
feature settings.
Press
2. once, siren will chirp once to indicate unit entered
feature number 1. Press
indicate unit entered feature number 2. Press
A U X
and siren will chirp three times to indicate unit entered feature
number 3.
A U X
8
button, the siren will chirp 3 times. Once the
A U X
and . Within 5 seconds siren will chirp once,
A U X
A U X
twice, siren will chirp twice to
© 2018 Directed. All rights reserved.
A U X
three times,
A U X