Página 1
Inscrivez le numéro de modèle ici. You may need / Usted puede necesitar / Articles dont vous pouvez avoir besoin: 3/32" (2.38mm) For easy installation of your Delta faucet you will need: ・To READ ALL the instructions completely before beginning.
Dans le cas d’une utilisation commerciale, la garantie est d’un an à compter de la date d’achat. pour toutes les demandes en vertu de la garantie, sauf si le produit a été enregistré auprès de Delta Aucune garantie ne couvre les piles.
Página 3
2578 Series/Series/Seria RP41574▲ Lift Rod Finial Specify Finish ▲ Pomo de la barra Especifíque el Acabado de alzar Précisez le Fini Grain de la Tirette RP40267▲ Lift Rod Barra de Alzar Tige de Manoeuvre RP24097 RP6060 1/4 Turn Stop Bonnet Nuts Tope a un 1/4 de Giración Bonetes/Capuchones Butée 1/4 de Tour...
▲ RP26533 (2578-LHP Only / Sólo / Seulement) Metal Pop-Up Assembly Less Lift Rod Ensamble de Metal del Desagüe Automático Sin la Barra de Alzar Renvoi Mécanique en Métal Sans la Tige de Manoeuvre ▲ RP5468 Stopper Tapón Bonde RP12516 Strap &...
Página 5
1/2" (13 mm) IPS Install handles (1). Be sure glide ring (2) is properly SHUT OFF WATER SUPPLIES. CONNECT TO WATER SUPPLIES. seated in bottom of handle before installing. (HOOK-UPS NOT PROVIDED). Remove old faucet. Place gasket (1) on bottom of Make connections to water lines.
Página 6
Step 3b Step 3 Step 3c Remove pivot nut (1). Install horizontal rod (2) and Metal Pop-up Apply silicone to underside of flange (1). stopper (3) as removable (4) or non-removable Insert body (2) into sink. Screw flange (1) Remove stopper (1) and flange (2). (5).
Página 7
Pop-Up with Metal Flange and Plastic Tail Piece Remove stopper (1), brass nut & washer (2), With pivot (1) facing toward faucet, pull popup Remove pivot nut (1). Install horizontal rod (2) black gasket (3) and tail piece (4). straight down into drain hole and secure and stopper (3) as removable (4) or non- gasket (2), brass nut and washer (3).
Página 8
Install Pop-Up Assembly FLUSH SYSTEM/CHECK FOR LEAKS. Remove aerator (1) and turn faucet handles (2) all the way Apply silicone to underside of flange (1). Remove stopper (1) and flange (2). on. Turn on hot and cold water supplies (3) and flush water Insert body (2) into sink.